Early Bronco Tremec TR4050 5-speed Swap Kit, SBF, Dana 20 SKU: 7259NET

Early Bronco Tremec TR4050 5-speed Manual Transmission Swap Kit

Includes TR4050 5-speed Manual Transmission. For use with stock early Bronco Dana 20 transfer case & Small Block Ford (289, 302, 351W) V8 engine.

The TR4050 five speed overdrive transmission is a top shifting, overdrive transmission with the shifter located in the rear section of the transmission. The transmission is able to handle the torque and horsepower of most V8s.

Like most transmission upgrades in the early Bronco, a 1-inch body lift is recommended when installing a TR4050 5-speed manual transmission in your Bronco. 

TREMEC TR-4050 Gear Ratios 6.16, 3.11, 1.71, 1.00, 076 Rev. 6.03.

600 lb-ft Torque Capacity
Original equipment in 2006-2007 F550 trucks
Right Side PTO - 6 bolt Offers the ability to run hydraulic pumps
High-contact constant-mesh helical gears for maximum strength
Die-cast aluminum allow housing saves weight while offering considerable rigidity
Multi-rail shift linkage provides excellent feel and performance
Tapered bearing on input, main and counter shafts provide excellent internal stability
Needle bearings under gears reduce friction and noise output
All forward gears and reverse gear synchronized
Advanced synchronizer technology promotes smoother shifting and reduced shift effort
Countershaft mounted 5th gear synchronizer improves noise, vibration, and harshness in overdrive. WH TR-4050 are specifically prepared to install in classic Fords. with the correct throwout bearing surface and front bearing retainer.

Basic Kit includes:
NEW TR-4050 Prepared for SBF install
TR-4050 Shifter
SBF Bellhousing Adapter
Crossmember Kit
TR-4050 to Dana 20 Adapter
REV. Wiring Adapter
Clutch Disc
Transfercase shifter bracket

Deluxe Kit Includes: everything in basic kit plus Centerforce 2 SBF pressure plate, Throwout bearing and pressure plate bolts. 

If you are installing with a J-shift Dana 20 #7231NET Twin Stick shifter is required and will need to be purchased sepratley. If you have a T-shift Dana 20 the 7231NET is recommended.