IDIDIT Direct Fit Tilt Column, Bare, Floor Shift, 74-77 Ford Bronco SKU: 2500N
IDIDIT Direct Fit Tilt Column, Bare, Floor Shift, 74-77 Ford Bronco
Product Overview:
This IDIDIT Steering Column will be a "Direct Fit" (2.25" OD) just like your original factory column. It comes bare steel so you can paint it to match your interior and will work with any floor shifter. Made in the USA
Full description
Ididit Direct Fit Tilt Steering Column for 74-77 Ford Bronco - Made in the USA
WH has worked with IDIDIT to bring you "Direct Fit" steering columns. This column will replace your bone stock 74-75 Bronco or 76-77 Bronco steering column with zero modifications. It's 2.25" OD just like your factory column. Bolt your stock steering wheel on, plug in your stock wiring, bolt the column into the stock location using the stock hardware, and hook up your stock lower steering shaft. Old column out new tilt column in, it's that simple! This column is bare steel, not painted (black and chrome also available) This column is for use with any floor shifter.
NOTE: For 74-75 Ford Bronco, you will also need a #2530 Rag Joint Flange to make this column bolt to your stock lower steering shaft. The spline on the end of the column is 3/4-36.
BODY LIFT NOTE: If you have or are planning on a body lift, do not buy or install the rag joint or rag joint flange. Instead, have us build you a #2161 Custom Lower Steering Shaft.