Secure Checkout

Tapered Reamer for Knuckles SKU: 2385

Tapered Reamer for Knuckles

Tapered Reamer for Knuckles

Tapered Reamer for Knuckles
Purchase Tapered Reamer for Knuckles
$89.99 SKU: 2385
Universal
3 Reviews

Product Overview:

This tapered reamer will allow you to ream your existing knuckles to the larger Ford tie rods or the "GM 1 ton" steering tie rods. This is also the same tool you'd need to place your tie rods on top of the steering knuckle or what's commonly called a "Tie Rod over conversion", or TRO.
•1-1/2" taper per foot or 7.125 degree included angle.
•6 Flute straight reamer design.
•Overall length is 6-1/2", flute length is 4-1/2", major diameter is .995".
•Shank diameter is 1/2" with a square on the end.
•To be used by hand with a tap wrench, in a drill press, or vertical mill with a 1/2" or larger drill chuck or collet.

Full description

This tapered reamer will allow you to ream your existing knuckles to the larger Ford tie rods or the "GM 1 ton" steering tie rods. This is also the same tool you'd need to place your tie rods on top of the steering knuckle or what's commonly called a "Tie Rod over conversion", or TRO.
•1-1/2" taper per foot or 7.125 degree included angle.
•6 Flute straight reamer design.
•Overall length is 6-1/2", flute length is 4-1/2", major diameter is .995".
•Shank diameter is 1/2" with a square on the end.
•To be used by hand with a tap wrench, in a drill press, or vertical mill with a 1/2" or larger drill chuck or collet.

This tapered reamer will allow you to ream your existing knuckles to the larger Ford tie rods or the "GM 1 ton" steering tie rods. This is also the same tool you'd need to place your tie rods on top of the steering knuckle or what's commonly called a "Tie Rod over conversion", or TRO.
•1-1/2" taper per foot or 7.125 degree included angle.
•6 Flute straight reamer design.
•Overall length is 6-1/2", flute length is 4-1/2", major diameter is .995".
•Shank diameter is 1/2" with a square on the end.
•To be used by hand with a tap wrench, in a drill press, or vertical mill with a 1/2" or larger drill chuck or collet.
Review Tapered Reamer for Knuckles

California residents: Proposition 65 Warning

Q&A

Have a question? Click Here to submit your question.
Know the answer? Add it here.


Your question will be published after review.


Asked by Greg Schofield, December 28, 2019

Q: Does this reamer allow me to use stock size 79 bronco tire rod ends?

1 Answer

Answered by sales - December 30, 2019

A: Yes, this tapered reamer will allow you to enlarge the taper or your stock holes, for the larger full size tie rod ends, with early Bronco knuckles.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Miguel Rivera, September 7, 2015

Q: Is this the same reamer I should use to open the tie rod holes of a 76-77 knuckles to use the t style tie rod?

1 Answer

Answered by sales - September 8, 2015

A: You can use the reamer to enlarge your current holes for earlier tie rods, or we have a T style available for the 76-77 #2390.

Know the answer? Add it here.

Know the answer? Add it here.

PRODUCT REVIEWS
bill noelle
Reviewed 11/15/2016
works like it should

69 2owner
Reviewed 02/10/2012
Product worked well completed all holes I needed for this project and maintained its edge for future work.

Mike
Reviewed 08/13/2011
Worked great just what i needed to get job done.


Shop popular categories
4,67 stars