Your Cart (0)
Highlander Fiberglass Hood, Deluxe, 66-77 Ford Bronco SKU: 5810
Highlander Fiberglass Hood, Deluxe, 66-77 Ford Bronco
Highlander Fiberglass Hood Deluxe 66-77 Bronco
Product Overview:
The Highlander Fiberglass Hood uses the stock hood body lines with a raise of about 3" in the front and then slopes down to a 1" rise on the rear.
Freight costs will not be calculated for this item, as it is too large for common carriers like UPS or FedEx. WILD HORSES will contact you via call or email with the freight costs for your approval prior to shipping
Full description
The Highlander Fiberglass Hood uses the stock hood body lines with a raise of about 3" in the front and then slopes down to a 1" rise on the rear.
Early Bronco Highlander Fiberglass Hood
Our Highlander hood uses the stock hood body lines with a raise of about 3" in the front and then slopes down to a 1" rise on the rear. Aluminum Trim not included.
The Deluxe Hood allows you to use your original hood latching hardware from your stock hood. These deluxe hoods have a built in support structure on the underside to add rigidity and strength. We have added a flat spot on the support to facilitate mounting hood pins.
Most of our hoods utilize a two piece mold design which allows for the rolled and finished front lip.
You will need to either reuse your old hood hinges or our new stainless steel hinges to mount the hood to the cowl. We always recommend the use of hood pins, especially considering how many calls we get about hoods popping open on the freeway and smashing over the top of the Bronco. Also see additional glass body part info on fiberglass body page. Important Note: All fiberglass hoods come with a white gel coat. They do not come painted.
Instruction 1
California residents: Proposition 65 Warning
Q&A
Please Sign In if you have a question or want to post an answer.
Asked by Craig Taylor, November 1, 2022
Q: Will this hood clear a 351W with EFI and stock body lift?
⮞ 1 Answer
Answered by ☆ sales - November 1, 2022
A: We would not expect any clearance issues. The Highlander offers about 3 in the front and then slopes down to a 1 rise on the rear. The 351W is about 1 taller than the normal 302.
Asked by Brian Lords, March 8, 2021
Q: I recently installed my fresh 302 engine in my 73 Bronco. I put the GM HEI distributor on... Noticed it will hit the hood, is this good going to clear it?
⮞ 1 Answer
Answered by ☆ sales - March 8, 2021
A: It should clear, BUT, we can't say for sure. The Highlander is close to 3 taller than stock at the front of the scoop.
Asked by Rick, June 5, 2020
Q: Will this hood give enough room for a pro flo 4 on a 302 engine.
⮞ 1 Answer
Answered by ☆ sales - June 8, 2020
A: We would not expect any issue. With a raise of about 3 in the front and then down to a 1 rise on the rear.It is about 2 taller than stock over the air cleaner. Keep the air cleaner height as modest, low profile, as possible.
Asked by Richard, August 28, 2016
Q: Hey, will this hood still allow my windshield to fold down and lay flush on the hood? Or does it stick up too high?
Want to place an order for this asap! Thanks
⮞ 1 Answer
Answered by ☆ sales - August 29, 2016
A: Really only the stock hood allows for the windshield to be folded down. Also with the weight of the windshield, frame, and wiper assembly, we would not recommend it.
Asked by JOHN, August 26, 2015
Q: Do I need to use the original yachting hardware for the highlander hood or could I just use hood pins?
⮞ 1 Answer
Answered by ☆ sales - August 26, 2015
A: We do recommend using hood pins over the original latch system.
PRODUCT REVIEWS
Shop popular categories
5 stars