Saginaw/Delphi Steering Pump Kit

Item #: 792030KIT

Read 17 Reviews | Write a Review

Read 8 Customer Questions | Ask a Question

Installation PDF

Price:

Description

NEW! Finally a simple bolt-on Saginaw power steering pump kit for your full size Ford 351M/400. This new kit includes everything you need with the exception of the belt due to variation in pulley sizes found on the stock motors. As pictured we include a new (not rebuilt) Saginaw/Delphi steering pump, power steering pressure hose, pump pulley, pump bracket, pump bracket brace, adjustment link and hardware. This kit works with or without A/C. Brand new Heavy Duty Delphi pump Do you really want to settle for a twenty-five year old rebuilt Saginaw pump? We hate defects. You hate defects. So, why buy used stuff when you can have new? Our heavy duty Delphi pumps put out more pressure and pump more GPM (gallons per minute) than the factory units and they have a large reservoir for added fluid capacity.
We use plated reservoirs as a standard feature. Not only do they look better but the plating adds superior corrosion resistance.
We sold rebuilt pumps for many years. We pulled our hair out trying to find a good source for rebuilt pumps. We used practically everyone in the business. No matter where we went, it was always the same - about one in ten didn't work right. With the volume of time and money spent on returns, this was unacceptable. Defects, even when handled correctly, do not reflect well for our customer service standards. For a long time, rebuilts were our only option. A few years ago, we received the opportunity to provide brand new pumps. We jumped on board wholeheartedly and have not looked back since. The pumps you see here are built exclusively for WILD HORSES. We are convinced you will not find better anywhere in the market place.
All of WH's Delphi pumps use a .750 shaft with a press fit pulley. For the best possible performance, WILD HORSES recommends using power steering fluid in all of our steering components.

This kit is designed for use on 78-79 Broncos and 77-79 F-150 with 351M/400M with or without A/C.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov

Saginaw/Delphi Steering Pump Kit
Item #: 792030KIT

Qty.

Installation

Installation Instructions

Product Reviews

Write a review

Power Steering Pump, upgrade

Aug 16, 2019 | By Mark

fits great, works great, couldn't be happier with purchase, Thanks!!!

Power stearing that works

Aug 12, 2019 | By Chris Mills

Fit is good and it works.

Simplest Installation I've Had So Far.

Jun 5, 2019 | By SkipDanesi

Own a 79 F150 and when the original pump started leaking I dreaded the thought of having to replace it. I went through the fun or should I say nightmare of bleeding the gearbox the first time. Remove the gearbox and hold it upright - seriously? What a pain. So happy this was as stated in the instructions. Total removal and install time of about 1-1 1/2 hours. Couldn't be happier. Thinking the Clydesdale Tie-Rod and Drag Link might be next. Thanks.

Complete Kit

May 6, 2018 | By Shawn Bonning

After purchasing this kit months ago, I finally got around to installing it. I had absolutely zero issues with it. The instructions were concise, and kit has every part you need except the belt. The only thing I wasn't smart enough to do was wait for the engine to cool down so I didn't get burned on the radiator while putting this kit on! This pump is so quiet, its like night and day compared to the stock plastic pump. Turns my 33's with a wimper.

Flawless Install with High Quality Parts

Mar 22, 2018 | By Robert Bowen

Switched over from stock during a frame off restoration of 1979 Bronco with 400. Easily compatible with Flowcooler waterpump. This is definitely a no fuss installation and makes a world of difference.

Saginaw/Delphi Steering Pump Kit

Feb 27, 2018 | By Jeremy Grimes

I installed this kit on my 77 F-150 with the 351M engine. Like some others have commented, I did have to slot the upper pump brace to get it to line up with the water pump mounting bolt. Other than that small issue, the kit went together great. The hardware is high quality and everything was included sans fluid. The truck drives better than brand new and steers like butter. I am running 35's and even parked at an idle the steering is fast and smooth. Bleeding the system was a non event unlike the old style pumps and it runs super quiet as well. After fighting 5 pumps over the last 10 years, I wish that I had done this after my first stock pump failed. Great product and a seriously worthy upgrade to these old trucks.

Power steering pump intall

Jan 7, 2018 | By Tim Smith

Works great! Easy install though did require slight modification of the upper bracket. I am running an aftermarket water pump which may have required the modification.

351m power steering pump upgrade

Nov 14, 2017 | By Brad Campbell

Perfect fit works great

Saginaw/Delphi Steering Pump Kit

Jul 20, 2017 | By Mark S Bonifacino

Install went on 1956 ford f100 with 1978 ford 400m engine perfect fit and am very pleased with the power steering fit and looks factory .....Thanks

Great customer service!

Feb 25, 2017 | By Robert Bryant

Paul and Tim took great care of me. Thanks again guys. I couldn't be happier with my purchase and I wouldn't hesitate to do business with you a second time.

351M Power Steering Pump Kit

Jan 1, 2017 | By Rob McMeans

Great product made very good.

SAGINAW CONVERSION 78 F150 400

Nov 6, 2016 | By 78 F150 4x4

After years of dealing with a whiny Cardone p/s pump, I decided to give this kit a try. As another reviewer found, the upper brace bar is too short to connect to the water pump bolt. I had to elongate the holes to make it stretch. Had to use a combination of other washers to make the kit work, but once installed, filled it with fluid (had prev flushed) and there was no bleeding necessary. It is now smooth and quiet and the steering turns with my pinky finger, even with 35" tires. It solved the problem, just wish they would correct the brace bar for a better fit and would be a bolt and go as they say. Be prepared for some trial and error in gettng it bolted and lined up. I got the 17540 belt from NAPA and it was a perfect fit. The ordering and shipping process was great.

Quieter, Stronger

Feb 28, 2016 | By Ford400V8

I needed a new power steering pump to not invalidate the warranty on the rebuilt steering gear I was also replacing. Rebuilt pumps suck, and since a new stock pump is unavailable for my old Ford, this was it. The install was a pain, but that is typical of an item that isn't stock. The spacers weren't the correct width. The stabilizing bar was about 3/32 inch too short- just enough to give me grief. However, with 3/8" washers and a bit of trial and error, it is a perfect fit. No exaggeration- the pulley alignment is perfect on all 3 axes. It was also super easy to bleed the air out!! I was dreading this, but it ended up being the easiest part- even with a completely drained steering gear, inline filter, and hoses. My truck turns smoother, the steering is more responsive in rough terrain, and doesn't squeal when stressed. While the stock pump wasn't bad overall, it isn't in the same class as this one. Extremely pleased with the upgrade.

Saginaw PS pump & Bracket

Dec 7, 2015 | By Wilder

Great CS from WH. Pump and bracket installed with no issue. Installed alongside my modified compressor pump bracket from Nostalgic AC.

Saginaw Steering Kit

Sep 2, 2014 | By Weylin Burke

This was a great kit and included everything which was nice. High quality, no issues, great upgrade.

Saginaw Pump

Aug 22, 2014 | By Bill C

I'm rebuilding a 78 Bronco. One thing I wanted was an upgraded power steering pump. This Saginaw pump was what I was looking for all in one place without a lot of junkyard searching (in Wyoming that isn't easy). Only problem I've had so far is I had to send the pump back because the pulley came mounted crooked. Otherwise, the pressure hose could be a little shorter with an L bend to the metal in both ends. You may end up making a new hose for your application. Will run it this weekend to see how it operates.

Made the job much easier.

May 1, 2014 | By John Duplechain

I considered hitting up junk yards and putting together a kit to convert my 78, but this made it way too easy for the price. Bolted right up, adjustment is really easy. Highly recommend this.