San Felipe Tube Roll Bar, Bare Steel, 66-77 Bronco SKU: 4258

All pieces went together well... good fit

This is a nice kit. All the pieces went together well and it actually looks meatier than it does in the photos online.

Install and fit went great, sanded and clear coated left bare. Looks great

Just received my San Felipe Roll Bar. Test fitted it and it will work fine for my 69 Bronco project. Customer service worked to get the produce to me ASAP. Will buy from them again in the future.

As always, the customer service is second to none! Cleaned the oil, primed and paint. Installed with my 12 year old son with ease. Looks great!

Perfect Fit, perfect hardware. Just GOOD QUALITY1

Perfect!

Pro: Everything fit. Welds are nice. Timely shipping. Easy to order. Con: Side tabs were welded on crooked, not in line with bed, had to bend them (not too difficult). Missing all 5/16" nuts, all 1/2" nuts and 2 3/8" nuts, though I welded so did not need 1/2" nuts. Shipping is expensive and by the time you are done with the cleaning and painting you are in to it for quite a bit. Advice: The instructions indicate to locate back pieces where you want them. Given the fuel line sheet metal on the drivers side rear, there seems to be only one location if you want the back braces in line with the rig. This leaves a large gap between the roll bar plate and the tail gate frame (normal). Instead of washers provided, use a 1/8x1x3 piece of bar stock with holes drilled in it. I found that on my rig one side had a bigger gap than the other (Ford issue) so needed two spacers on one side. The washers wont fit where the bed rolls over to the tail gate frame. IMO the kit should come with these spacers as there appears no other location to install the roll bar. If your going to paint it you will spend a lot of time cleaning it. Machine oil and rolling slag. Oddly, the swagged tube was bright steel and required little cleaning. Would have been nice if all four pieces where like that. The other three pieces required lots of sanding and cleaning to get rolling slag off. I welded mine together then sanded cleaned and painted it with black Rustolium hammered metal paint. This gives it a nice finished look.

The bar is great. Easy to install and a great fit. Highly recommend, far more substantial than the flimsy OEM bar.

Nice fit, easy installation

Outstanding quality. This thing fits great and really sets the Bronco off. Easy assembly and everything went really smooth. Installation was a breeze.

The Price was great, shipping was reasonable, assembly was easy, Great Purchase!!!!! All hardware for installation was included and fit as it needed to.

Wild Horses once again provided me with outstanding quality. Shipping problem thanks to UPS incompetence, but Tim in CS was fast and professional. Sent another right away. Thanks WH's!!!!

roll bar was shipped quick and worked great

good simple roll bar, just what I need. Easy install and great quality. Great customer service, thanks Cory.

The roll bar was easy to fabricate and install...Also, look good!

The roll bar itself is of great quality. Very sturdy. No complaints there. However, the hardware was an issue. The special bolt w/ allen wrench was missing from the packet. I called and they are mailing one to me. Also, there are six large washers that are installed on the underside of the truck. The bolt holes are too close together for the large washers to work without overlapping. I had to hacksaw four of the washers to make them work. I can see where the larger washers are necessary. However, it would be nice if four of the washers were flat on one side so that the customer would not have to field cut.

I received this roll bar and have no issues with the bar itself. However the center bolt that attaches the main hoop was incorrectly drilled. The hole didn't align correctly for the bolt requiring the hole on one side to be elongated for each side of the two piece connecting bolt to align. After modification so that the bolt would connect, we found that that the plates that bolt into the bed were 4-5 inches off alignment, indicating that the original hole had been drilled with the hoop twisted somewhat. We will have to drill a completely new hole in the center with the hoop properly aligned to make the roll bar work correctly. Wild Horses customer service was very accommodating with the issue.

Thank you for your help and expertise

I love this roll bar. was exactly what I wanted.

GREAT item at a great price! Fit perfect easy to install

The San Felipe Tube Bar along with three point seat belts that installed two years ago did their job and saved three teenage boys that where hit causing them to roll my 1975 Bronco twice ending up on the roof . I will be purchasing the same bar but with the upgrade for the six point for added protection.

Very easy install. Good product if you want a easy and less expensive product. Plus it is not cheap looking.

Everything worked as it should and came with very clear instructions.It turned out great and looks very nice. I would highly recommend this product to anyone!

Great product.easy to install and looks awesome