Secure Checkout

Reid Racing Flat Top Left Dana 44 Knuckle, Ford SKU: RRD44001FL

Reid Racing Flat Top Left Dana 44 Knuckle, Ford

Reid Racing Flat Top Left Dana 44 Knuckle, Ford

Reid Racing Flat Top Left Dana 44 Knuckle Ford
Purchase Reid Racing Flat Top Left Dana 44 Knuckle, Ford
$399.00 SKU: RRD44001FL
0 Reviews

Product Overview:

  • Sold individually
  • D44001FL (left, driver's side)
  • Cast from high strength ductile iron
  • Beefed up with extra material and ribbing
  • Flat tops machined and drilled for high steer arms
  • 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)
  • 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
  • Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
  • Tapered tie rod holes accept 78-79 Bronco or 76-79 F150 tie rod ends
  • Tie rod holes can be drilled to accept 3/4" heim ends
  • Powder coated bright orange for long lasting looks
  • Interchangeable with all factory and aftermarket Dana 44 components
  • Fully machined and ready for installation
  • Tie rod hole is tapered from the bottom to the top
  • Based on the Bronco disc brake knuckle and fit 1/2 and 3/4 ton brakes
  • The only aftermarket knuckle available for a Ford Dana 44.
Knuckles for off road use only.
There is no warranty on this product.

Full description

  • Sold individually
  • D44001FL (left, driver's side)
  • Cast from high strength ductile iron
  • Beefed up with extra material and ribbing
  • Flat tops machined and drilled for high steer arms
  • 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)
  • 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
  • Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
  • Tapered tie rod holes accept 78-79 Bronco or 76-79 F150 tie rod ends
  • Tie rod holes can be drilled to accept 3/4" heim ends
  • Powder coated bright orange for long lasting looks
  • Interchangeable with all factory and aftermarket Dana 44 components
  • Fully machined and ready for installation
  • Tie rod hole is tapered from the bottom to the top
  • Based on the Bronco disc brake knuckle and fit 1/2 and 3/4 ton brakes
  • The only aftermarket knuckle available for a Ford Dana 44.
Knuckles for off road use only.
There is no warranty on this product.

  • Sold individually
  • D44001FL (left, driver's side)
  • Cast from high strength ductile iron
  • Beefed up with extra material and ribbing
  • Flat tops machined and drilled for high steer arms
  • 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)
  • 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
  • Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
  • Tapered tie rod holes accept 78-79 Bronco or 76-79 F150 tie rod ends
  • Tie rod holes can be drilled to accept 3/4" heim ends
  • Powder coated bright orange for long lasting looks
  • Interchangeable with all factory and aftermarket Dana 44 components
  • Fully machined and ready for installation
  • Tie rod hole is tapered from the bottom to the top
  • Based on the Bronco disc brake knuckle and fit 1/2 and 3/4 ton brakes
  • The only aftermarket knuckle available for a Ford Dana 44.
Knuckles for off road use only.
There is no warranty on this product.
Review Reid Racing Flat Top Left Dana 44 Knuckle, Ford

California residents: Proposition 65 Warning

Q&A

Have a question? Click Here to submit your question.
Know the answer? Add it here.


Your question will be published after review.


PRODUCT REVIEWS
No Reviews Yet!

Shop popular categories