Your Cart (0)
Reid Racing Flat Top Right Dana 44 Knuckle, Ford SKU: RRD44001FR
Reid Racing Flat Top Right Dana 44 Knuckle, Ford
Reid Racing Flat Top Right Dana 44 Knuckle Ford
Product Overview:
- Sold individually
- D44001FR (right, passenger's side)
- Cast from high strength ductile iron
- Beefed up with extra material and ribbing
- Flat tops machined and drilled for high steer arms
- 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)
- 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
- Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
- Tapered tie rod holes accept 78-79 Bronco or 76-79 F150 tie rod ends
- Tie rod holes can be drilled to accept 3/4" heim ends
- Powder coated bright orange for long lasting looks
- Interchangeable with all factory and aftermarket Dana 44 components
- Fully machined and ready for installation
- Tie rod hole is tapered from the bottom to the top
- Based on the Bronco disc brake knuckle and fit 1/2 and 3/4 ton brakes
- The only aftermarket knuckle available for a Ford Dana 44.
There is no warranty on this product.
Full description
- Sold individually
- D44001FR (right, passenger's side)
- Cast from high strength ductile iron
- Beefed up with extra material and ribbing
- Flat tops machined and drilled for high steer arms
- 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)
- 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
- Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
- Tapered tie rod holes accept 78-79 Bronco or 76-79 F150 tie rod ends
- Tie rod holes can be drilled to accept 3/4" heim ends
- Powder coated bright orange for long lasting looks
- Interchangeable with all factory and aftermarket Dana 44 components
- Fully machined and ready for installation
- Tie rod hole is tapered from the bottom to the top
- Based on the Bronco disc brake knuckle and fit 1/2 and 3/4 ton brakes
- The only aftermarket knuckle available for a Ford Dana 44.
There is no warranty on this product.
- Sold individually
- D44001FR (right, passenger's side)
- Cast from high strength ductile iron
- Beefed up with extra material and ribbing
- Flat tops machined and drilled for high steer arms
- 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)
- 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
- Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
- Tapered tie rod holes accept 78-79 Bronco or 76-79 F150 tie rod ends
- Tie rod holes can be drilled to accept 3/4" heim ends
- Powder coated bright orange for long lasting looks
- Interchangeable with all factory and aftermarket Dana 44 components
- Fully machined and ready for installation
- Tie rod hole is tapered from the bottom to the top
- Based on the Bronco disc brake knuckle and fit 1/2 and 3/4 ton brakes
- The only aftermarket knuckle available for a Ford Dana 44.
There is no warranty on this product.
California residents: Proposition 65 Warning
Q&A
Have a question? Click Here to submit your question.
PRODUCT REVIEWS
No Reviews Yet!
Shop popular categories