IDIDIT Direct Fit Tilt Column | Chrome, A/T Column Shift | 74-77 Ford Bronco SKU: 2511N

IDIDIT 74-77 Bronco Direct Fit Chrome Tilt Steering Column - Made in the USA

For Floor Shifter Applications

WH has worked with IDIDIT to bring you "Direct Fit" steering columns. This column will replace your bone stock 74-75 Bronco or 76-77 Bronco column with zero modifications. It's 2.25" OD just like your factory column. Bolt your stock steering wheel on, plug in your stock wiring, bolt the column into the stock location using the stock hardware, and hook up your stock lower steering shaft. Old column out new tilt column in, it's that simple! This column has a bright chrome finish.

NOTE: For 74-75 Ford Bronco, you will also need a #2530 Rag Joint Flange to make this column bolt to your stock lower steering shaft. The spline on the end of the column is 3/4-36.

BODY LIFT NOTE: If you have or are planning on a body lift, do not buy or install the rag joint or rag joint flange. Instead, have us build you a #2161 Custom Lower Steering Shaft.

Don't forget to select an indicator for your column from the related products below.