Track Bar Drop Bracket, 66-75 Ford Bronco SKU: 1253

Early Bronco Track Bar Lowering Bracket | 66–75 Bronco

Correct your front suspension geometry and improve steering response with this Track Bar Lowering Bracket for 1966–75 Ford Bronco. When lifting your early Bronco 3 inches or more, this bracket helps bring the track bar back toward its factory angle to reduce bump steer and maintain proper axle alignment. It’s also a must-have for 2.5" lifted Broncos using the F-100 to F-350 2WD steering box conversion.

This bracket is designed to bolt to unmodified stock frames, but welding is required to ensure long-term strength and safety.

• Fits 1966–75 Ford Broncos: Designed for unmodified stock frames.

• Corrects Track Bar Angle: Essential for lifted Broncos to improve handling and reduce bump steer.

• Ideal for 3”+ Lifts: Strongly recommended for suspensions lifted 3 inches or more.

• Required for F100 2WD Steering Box Conversions: A must for Broncos with 2.5" lift using this conversion.

• Works with Drop Pitman Arms: Only when using stock-style tie rod and drag link (not with 2WD steering box setups).

• Bolt-On Fit, Weld-On Finish: Installs easily, but requires welding for proper long-term use.

• Do Not Remove Factory Bracket: This unit is designed to work with your existing setup.

If you have lifted your 66-75 Bronco, this drop bracket realigns your track bar to reduce bump steer and improve handling. A must for 3” lifts or greater.