Lift Block Kit

Item #: 1499
Here's an economical way to achieve added height for the rear end of your Bronco. Works only with stock style springs (5-6 leaf pack).
Our Price:

Description

Lift blocks are a very economical way to achieve added height for the rear end of your Bronco. The thing to keep in mind in deciding whether or not to use lift blocks is how you are going to use the Bronco when you are done. If you are building the ultimate trail rig lift blocks will not be a good choice. For a street cruiser on a budget a set of lift blocks just might be the way to go.
WH uses the best lift block we can buy. These are steel so you don't have to worry about them breaking apart like cheaper aluminum blocks. Our blocks have a built-in taper to help with pinion angle.
The kits come complete with u-bolts, nuts and washers. The kits are available in 2.5" and 3" heights.
NOTE: The holes in the top of each block may need to be drilled out to fit larger spring center pins like those found on Wild Horses spring packs.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
Lift Block Kit
Item #: 1499

Product Reviews

Write a review

Like a charm!
Apr 10, 2020  |  By Mark W
Review star icon Review star icon Review star icon Review star icon Review star icon
Install went really well! The hardest part is getting the old parts off especially when rust is involved. Be sure to have your jack stands ready! Install was quick and easy and packaging was good. A little elbow grease and you can have it done in a few hours.

Great kit to level out my Bronco
Jun 7, 2019  |  By Robert
Review star icon Review star icon Review star icon Review star icon Review star icon
I purchased new leaf springs and the bronco still squatted. These blocks did the trick to level it out without replacing the springs again.

Pinion Angle Fix
Mar 31, 2019  |  By Mark
Review star icon Review star icon Review star icon Review star icon Review star icon
This block kit corrected my bad pinion angle. Easy install.

2.5 inch blocks
May 12, 2016  |  By Jacob
Review star icon Review star icon Review star icon Review star icon Review star icon
Great product, easy to install. Added these to recently installed wild horses 2.5 inch suspension lift. Had some concerns with lengths of included u bolts, but they were plenty long enough. Costumer service at wild horses is awesome. Even offered to buy back the bolts that came with the kit if they weren't long enough. By phone or email there is always someone more then happy to help!!!!!

Q&A

Close