17 High Output Radiator Fan

Name: 17 High Output Radiator Fan
Brand: WILD HORSES 4X4
Price: 224.99 USD
Availability: InStock
Rating: 4.80 (5 reviews)

Item #: 5051

A primary fan to replace your stock mechanical fan that features a dual speed motor that can move up to 2400 cfm and mounts as either as a pusher or puller fan without having to reverse the blade or rewire the motor. Features curved blades for quiet operation.

Read 5 Reviews | Write a Review

Read 2 Customer Questions | Ask a Question

Installation PDF

Price:

Description

17" High Output Radiator Fan
Designed to be used as a primary fan, replacing your stock mechanical fan, this unit features a dual speed motor that can move either 2400 cfm (high speed) or 1800 cfm (low speed) with a 24 or 18 amp draw respectively. Mounts as either as a pusher or puller fan without having to reverse the blade or rewire the motor. Requires a mere 2.7 inches of clearance. Features curved blades for quiet operation.

Important Note: While this fan can be mounted as a pusher, there is not enough vertical clearance within the Bronco core support for it to bolt up in front of the radiator. Please be sure to have at least 3 inches of clearance between the back of the radiator and pulleys, or anything else it might hit, to allow for body flex and engine movement, otherwise contact may occur.

IMPORTANT INFORMATION

* Have you verified that you have at least 3 inches of clearance between the back of the radiator and pulleys, or anything else it might hit, to allow for body flex and engine movement?

17 High Output Radiator Fan
Item #: 5051

Qty.

California Residents: Proposition 65 Warning

Installation

Installation Instructions

Product Reviews

Write a review

Jun 27, 2017 | By Randy Baker

I just put this in my 71 bronco, what an awesome fan. I can't say enough good things about it. I'd tried two other fans but neither would keep my engine cool until now.

Some custom work needed

Jan 28, 2014 | By Marc L

The fan works great!! I'm using MSD Atomic EFI to control the fan speeds. It works well because of the 2 settings the fan and the throttle body have. Under the hood there is about 1/8 inch of room between the fan and the pulley attached to your water pump without modification. The upper radiator mounts can be moved to the "front" side of the core support to get you the extra clearance. Its quiet and effective. Jonny at Wild Horses was very helpful in figuring out how to make i fit.. give them a call.

Electric Fan

Dec 16, 2013 | By OriginalTxan

I caught this product on sale and then as a follow up a WH sales associate called me to provide guidance on my purchase. Quality input, Quality Staff, Quality Product

Great Fan

Aug 26, 2012 | By Evan

For me the fan kicks in when my engine hits about 205 and the 1st speed drops its down to 190 in about 10 seconds. Haven't been in a situation where I need the second speed but I know I won't be over heating with this, much better than the mechanical one, just make sure you have the 3 inches or you will need to make new mounts for the top of the radiator

mary gransden

Apr 20, 2012 | By Mary Gransden

Very satisfied with products and will order again