Ford AODE/4R70W/4R75W to Dana 20 Adapter Use this one if you are converting a 2WD or 4WD electronically controlled transmission. Year range 1992-2003.
Our Ford AODE & 4R70W / 4R75W adapter to the Bronco Dana 20 is 6.00" in length. The adapter material is 356 T-6 heat treated aluminum alloy, and the adapter has a provision to retain the original early Bronco mount. The adapter kit includes an adapter housing, new output shaft, spud shaft, retainer, bearing, snap ring, gasket, seal, o-ring, fastening hardware and adapter instructions.
The adapter assembly will fit any 1966-77 Bronco Dana 20 transfer case. T-style transfer case shifter linkage is required.
This adapter kit is designed for exclusive use with the Ford AODE & 4R70W / 4R75W automatic transmissions. These 4 speed, overdrive transmissions were introduced during the 1992-2003 model years. It is very important that the new main shaft furnished is compared to the original main shaft being replaced.
™ Dana is a trademark of Dana Limited.
If the Dana logo is not shown, these parts
are not manufactured or authorized by Dana.
|WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.|