Description
Throw away those leaky rubber grommets! This Firewall Boot is the BEST way to run wires, hoses, and other lines through your Bronco's firewall. Simply drill a 1.25" diameter hole in the firewall and install the boot. Run your wires, trim the boot as necessary, and secure the assembly with a zip tie. It's that easy!
•Safely and cleanly run wires through firewalls and bulkheads
•Protects wires from sharp edges; prevents wire chaffing and shorts
•Eliminates air/water leaks
•Fits a variety of wire thicknesses and bundles from 3/8 inch to 1 inch; 1-1/4 inch hole required for installation
•Works great for tubing and air lines
 | WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.P65Warnings.ca.gov |