Buy Drum Brake Master Kit - Early Ford Bronco Parts

Drum Brake Master Kit

Item #: 3070
Our drum brake master kits will give you most every thing you need to renew the drum brakes on your Bronco.
Our Price: $134.99–$209.99

Description

Our drum brake master kits will give you most every thing you need to renew the drum brakes on your Bronco.

Each kit includes two new drums, shoes, right and left wheel cylinders, right and left self adjusters and spring kit.

**Early 69 Front Drums are thin at the hub mounting surface, approximately 1/8" thick. The Late 69 Front Drums are thicker at the hub mounting surface, approximately 9/32" thick.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
  • 66-69 1/2 Front Brake Drum
    Item #: 3070 EARLY FRT
  • $134.99
  • 69 1/2 - 75 Front Brake Drum
    Item #: 3070 LATE FRT
  • $169.99
  • 66-75 with 11X1.75 Rear Drums
    Item #: 3070 66-75 LG R
  • $159.99
  • 66-75 SB with 10X2.5 Rear Drums
    Item #: 3070 SMALL REAR
  • $209.99
  • 74-75 LB with 10X2.5 Rear Drum
    Item #: 3070 74-75 LG R
  • $189.99
  • 76-77 with 11X2.25 Rear Drums
    Item #: 3070 76-77 LG R
  • $149.99

Product Reviews

Write a review

Rear Drum Brake Complete Kit 1975 Bronco
Apr 20, 2020  |  By Gary Gayda
Review star icon Review star icon Review star icon Review star icon Review star icon
This Rear Drum Brake 10" x 2 1/2" Complete Kit was complete and correct. At first I thought that the wheel cylinders were incorrect because the cast body of my old cylinders were larger than the new ones which I reasoned the bore size would be smaller than my old cylinders. After I took apart one of my old cylinders I found that the were in fact the same bore size (13/16").

Front Drum Brake Complete Kit 1975 Bronco
Apr 20, 2020  |  By Gary Gayda
Review star icon Review star icon Review star icon Review star icon Review star icon
I was a bit disappointed in this front 11" x 1.75" kit. The upper springs in the kit were not correct. Four identical upper springs were in the kit but were not for the Bronco. The Bronco requires two short heavy springs and two longer lighter tension springs one for each side. I reused my old springs. The bottom springs were correct and I used the new ones. The hole in the brake shoe that retains the self adjuster cable guide was too close to the shoe backing plate so that the cable was pinched between the backing plate and the cable guide. I had to elongate the hole toward the inside of the brake assembly so that there would be enough clearance for the cable to move when required. It was not clear which of the shoes were to be installed on the front and which were to be installed on the rear of the backing plate because the shoe lengths were the same. Typically the shorter length shoe is to go to the front and the longer is to go to the rear. A slight difference in the thickness (thinner) and the material of one pair of shoes indicated to me that they were probably intended for the front of the backing Plate.

My Bronco parts place
Nov 2, 2016  |  By B. D. M.
Review star icon Review star icon Review star icon Review star icon Review star icon
One of the best sources for early Bronco parts I've found. Quick service.

Brake overhaul
May 19, 2016  |  By David
Review star icon Review star icon Review star icon Review star icon Review star icon
Very happy with the brake overhaul kit. The emergency brake return springs did not work on my Bronco so I just used my original ones. It's nice to be able to get everything in one box shipped right to me! The only thing to consider is that the parts have the made in China stamp on them.

Great Kit
Jan 12, 2015  |  By BoureeOne
Review star icon Review star icon Review star icon Review star icon Review star icon
This is a great kit. High quality. Here is something I wish was included in the description, just as a helpful hint. A bullet point short list would be great. There are things that you must hold on to from your brakes that you are rebuilding, that are not included in this kit. 1. The wheel cylinder pins. 2. The parking brake link spring ( this spring is NOT included in the spring kit ). 3. The parking brake link bar. 4. The parking brake lever. 5. The bolts for mounting the cylinders.

1969 Bronco Rear Drum Brake Kit
Oct 23, 2014  |  By David Shantz
Review star icon Review star icon Review star icon Review star icon Review star icon
It was nice to place one order and have all the items sent to you. No need to go down a list of parts to order to do a rebuild of the rear brakes. Equipment arrived in one day and looked top quality. It nice getting from a company the knows the Classic Bronco

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.