Secure Checkout

WH Gorilla Warflares Fender Flares, Full Set, 66-77 Ford Bronco SKU: 5775

WH Gorilla Warflares Fender Flares, Full Set, 66-77 Ford Bronco

WH Gorilla Warflares Fender Flares, Full Set, 66-77 Ford Bronco

WH Gorilla Warflares Fender Flares Full Set 66-77 Bronco
Purchase WH Gorilla Warflares Fender Flares, Full Set, 66-77 Ford Bronco
$329.99 SKU: 5775
Fits 66-77 Ford Bronco
52 Reviews

Product Overview:

It won't take you long to figure out why Bronco owners are going ape over these Gorilla Warflares. It's simple, they do not break! A classic look, larger openings, and almost indestructible material make for the most durable Bronco flare on the market.

  • Specifically designed for 66-77 Ford Bronco
  • Includes welting & screws
  • Virtually indestructible!

Full description

It won't take you long to figure out why Bronco owners are going ape over these Gorilla Warflares. It's simple, they do not break! A classic look, larger openings, and almost indestructible material make for the most durable Bronco flare on the market.
  • Specifically designed for 66-77 Ford Bronco
  • Includes welting & screws
  • Virtually indestructible!

The Best Early Bronco Fender Flares on the Market

Transform your 66-77 Ford Bronco with WILD HORSES Gorilla Warflares – the ultimate fender flares for Bronco enthusiasts who demand the best. Built to withstand extreme conditions, these early Bronco fender flares offer unmatched durability, a classic look, and larger openings for an aggressive stance. Whether you're cruising the streets or tackling rugged off-road trails, Gorilla Warflares provide the perfect blend of style and practicality.

Key Features:

  • Indestructable: Built for 66-77 Ford Bronco owners who demand the best, these fender flares resist breaking even under extreme conditions. 

  • Classic and Extreme Installation: Can be installed in the traditional position for a classic look or up to the body line for hardcore wheelers.

  • Paintable Finish: Comes in a sleek black finish but can be painted to match your Bronco's style.

  • Complete Kit: Includes both front and rear flares, welting, mounting hardware, and instructions for easy installation.

Customers have tested these flares by rolling, smashing, and practically destroying their Bronco's sheet metal, only to find they can simply remove and reuse the Gorilla Warflares on new metal. This level of durability and practicality is unmatched in the market.

Upgrade your classic Ford Bronco with the strength, style, and practicality of WILD HORSES Gorilla Warflares. Experience the most durable fender flares available and enhance your Bronco's rugged look and performance.






pdf-file

Instruction 1

Review WH Gorilla Warflares Fender Flares, Full Set, 66-77 Ford Bronco

California residents: Proposition 65 Warning

Q&A

Have a question? Click Here to submit your question.
Know the answer? Add it here.


Your question will be published after review.


Asked by Anonymous, October 2, 2022

Q: I purchased a set (4) of The Gorilla Warfare flares for my 72 Bronco. I don't want to cut much of my fender. Are these the flare for me? Or should I go another route?
Thanks

1 Answer

Answered by sales - October 11, 2022

A: These should allow you to adjust the fitment. We would not expect an issue, but some trimming will be necessary. Best way, take one out and tape it up to the Bronco. Move it around and see how it looks.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Dewey, March 28, 2022

Q: I have the fiberglass flares. Will the Warfares fit without needing to do any sheet metal cutting when I replace them?

1 Answer

Answered by sales - March 28, 2022

A: You should be able to position the Warflares in the same or similar position to your fiberglass flares. Sometimes, it is worth a little trimming to get a better fit. Ultimately, it is up to the installer to determine. The size and shape are similar, but the Warflares are much more flexible.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Dale, January 19, 2022

Q: Can these War Flares be used to replace existing flares with 1/8 rivets holes 3 inches on center with the supplied screws?

1 Answer

Answered by sales - January 21, 2022

A: Usually, yes, but not always. The Gorilla flares are not pre-drilled, so you can make your own mounting screw spacing. If you are careful removing the rivets, the screws should fit the hole that is left. Worse case, you may need to get larger screws, if keeping the same holes is important to you.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Anonymous, October 24, 2020

Q: Can these be installed on fiberglass front fenders?

1 Answer

Answered by sales - October 26, 2020

A: Yes, though you may need to take extra care in mounting them. They come with self tapping sheet metal screws. You may research what fastener may be best in your situation.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Mike, May 2, 2020

Q: Can they be installed so that the hardware is not visible?

1 Answer

Answered by sales - May 4, 2020

A: We have not found an effective way to install them like that.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Robert, June 25, 2019

Q: Will they fit the 1977 Bronco with two gas tank filler flaps?

1 Answer

Answered by sales - June 27, 2019

A: Yes, they will fit with the 77 gas doors. You can either mount them lower on the quarter panel below the doors, or you can trim the flares and mount them higher.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Anonymous, May 22, 2016

Q: How wide are the flares?

1 Answer

Answered by sales - May 23, 2016

A: The flares stand off the body approximately 2 1/2. They are very flexible, and can be run closed in, or spread out to allow more or less clearance.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Gary, June 9, 2014

Q: Are the Gorilla warflares paintable?

1 Answer

Answered by sales - June 9, 2014

A: Yes, and the painting instructions you can see by clicking the installation PDF.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Eric, September 21, 2013

Q: Interested in your flares, do they have holes pre-drilled in them? And will they fit 90 ford bronco 2 / ranger?

1 Answer

Answered by 8578 - September 23, 2013

A: These are for 66-77 Broncos. They do not have pre-drilled hole. We do not have pre-drilled holes because that gives our customers control over the finished look of more or less hardware. If we do the install we typically put 3 space between the hardware.

Know the answer? Add it here.

Know the answer? Add it here.

PRODUCT REVIEWS
Nathan jonard
Reviewed 09/11/2024
I recently purchased a new set of gorilla warflare fenders for my 68 bronco that is sitting on 40" tires and setup for rock crawling. These fenders are simply the best. The quality is second to none and the flexibility is out of this world. They hold their shape and flex with no issues what so ever.

Thomas L.
Reviewed 04/10/2024
Put some flex add with my paint before painting and installing them. Looks and fits Great! Instructions, welting, and screws came with it. Thanks WH

68 Bronco Life
Reviewed 04/03/2023
Great flares! easy to flex into place before install. hardware comes with the kit so it pretty simple.

Todd Freeman
Reviewed 08/12/2021
These things are awesome! No matter what i bounce them off of or how hard, they barely get a scratch. If you use your rig, there is no other flare option!

Craig-Ellis Sasser
Reviewed 11/22/2020
I bought these back in 2003 or 2004, and they were great. As advertised, they do not break and remain flexible for years without fading. They can be stretched wider to accommodate bigger tires or left as is.

Heath Powers
Reviewed 10/05/2020
Great fit and look

Dowell Buckner
Reviewed 10/02/2019
Best flares I've ever installed! I've owned over 50 early Broncos and have used every flare out there!

Jeff Rhoden
Reviewed 08/21/2019
Worked great. My rear axle is moved about 6" back and front axle about 3" forward with 40" tires and fenders cut up to the body seam. Warflares are the only flares I know of that can stretch right on without becoming warped and are easy to trim as needed.

Ryan Schmitt
Reviewed 07/08/2019
Great product and easy to install. I used a cutting wheel and angle grinder. Also, map out your screws early. I spaced them about 4 inches apart and didn't have enough to complete a 4 fenders.

Darren S Simmons
Reviewed 06/16/2019
Easy install nice product Love the new look with all 4 fender flares on my bronco and was able to paint them

NATHAN HAYTER
Reviewed 03/20/2019
Fitment was really good very impressed with the quality would definitely purchase again for my next build

Ron Foster
Reviewed 02/28/2019
These were great easy to install. Would recommend to anyone.

Tom Thomas
Reviewed 01/07/2019
Order came in good condition. Flares are great. My only issue is the high cost on the freight.

billy whitford
Reviewed 12/27/2018
The flairs are everything you promised. However when I laid them on the side of my Bronco the openings are wider than I want on the bottom of the finders. I want a tighter look. My Bronco already has a set of custom flairs on the rear. I plan to return the flairs and get a 2' lift.

Anne Klein
Reviewed 10/29/2018
Happy with purchase. Flares look like they could handle a beating. Needed to do some modifications with fender for the perfect. Definitely need extra hands for that job!! Great product. Thanks WH!!

Jacqueline scotland
Reviewed 10/18/2018
Fit perfect, shipped fast and they follow up with you! Great product and company!!

Thomas Curtis
Reviewed 09/27/2018
The flares are very attractive and tough. What more could you want?

William Moore
Reviewed 02/25/2018
Very good site to find "hard to find parts".

Chris Carlin
Reviewed 12/18/2017
Great product, smooth install, would definitely by again

Steve Badger
Reviewed 11/28/2017
The install was a breeze . Fits and looks GREAT!

Clint
Reviewed 07/07/2017
Great flares, very tough and easy to install

Kelly Vandevender
Reviewed 03/20/2017
These flares are the best on the market. I've had other brands , the rivet holes crack out and don't flex as advertised. Gorilla flares are simply awsome

sl12345
Reviewed 12/31/2016
They are excellent I love them so much and definitely going to be recommending people to here. Awesome product from an awesome company!! With super fast shipping too!

Gary
Reviewed 12/17/2016
As with most of the Wildhorses products, this is a good quality set. Nice and smooth with no blems.

Bill
Reviewed 09/23/2016
Outstanding product. Tried the competition first and wasted money on a product that was not as advertised. WH's simple instructions, easy of installation, and they look great! Very pleased to say the least.


Shop popular categories
4,94 stars