2-degree Front End C-Bushings - Set of 4, 66-79 Ford Bronco SKU: 1363

2-Degree C-Bushings | Set of 4 | 66–79 Bronco, 67-79 Ford F100/F150 4x4

Dial in your stock height truck or Bronco’s front-end geometry with this set of 2-Degree C-Bushings, built for 1966–79 Ford Bronco or 1967-79 Ford F150 4WD running the stock height suspension. These heavy-duty bushings are made from self-lubricating, graphite-impregnated polyurethane for long life and quiet operation—no squeaks, no shifting. If your rig's handling feels off, these could be what you need to correct caster and keep your classic Ford tracking straight.

Pro Tip: If you're chasing poor handling or wandering, this could be the fix—worn or incorrect caster bushings are one of the most overlooked culprits. If you have lifted your vehicle, consider going to 7-degree bushings to ensure the proper amount of caster adjustment for your lift.

• Correct Caster for Stock Height Rigs: Built-in 2° of positive caster—ideal for Broncos running the stock height suspension

• Self-Lubricating Polyurethane: Graphite-impregnated for long-lasting performance without noise or binding

• Extreme Condition Retention: Inner and outer lips keep bushings secure under trail and highway stress

• Clean Black Finish: No fading or discoloration over time like colored poly bushings

• Easy Identification: Molding clearly shows install orientation—no guessing during installation

Additional Info

• Fitment:
  • 1966–79 Ford Bronco - ALL
  • 1967-79 Ford F100/F150 4WD

• Recommended Use: For vehicles with stock height suspension or radius arms with built-in caster adjustment

Install Notes: Install with the markings facing out. Torque arms evenly and recheck after first off-road trip

If your stock height classic Bronco or Ford truck wanders, these 2° C-bushings bring your front end back in line - built tough to handle the trail and street.