Your Cart (0)
Steering Column Bearing, Upper or Lower, 66-73 Bronco, 57-73 Ford Truck SKU: 2663
Steering Column Bearing, Upper or Lower, 66-73 Bronco, 57-73 Ford Truck
Product Overview:
Restore crisp, responsive steering in your classic Bronco with our Upper or Lower Steering Column Bearing. Designed for a precise OEM-style fit in 1966–73 Ford Bronco factory steering columns, this high-quality bearing installs at either the top or bottom of the column to keep your steering shaft spinning smoothly. Whether you’re refreshing worn components or doing a full steering column rebuild, this bearing is an essential piece of the puzzle. Sold individually — you’ll need two to complete the job — and don’t forget to add the matching bearing sleeve for best results!
Sold individually - requires two (2) per Bronco. Also fits 57-73 Ford Trucks.
Full description
Restore crisp, responsive steering in your classic Bronco with our Upper or Lower Steering Column Bearing. Designed for a precise OEM-style fit in 1966–73 Ford Bronco factory steering columns, this high-quality bearing installs at either the top or bottom of the column to keep your steering shaft spinning smoothly. Whether you’re refreshing worn components or doing a full steering column rebuild, this bearing is an essential piece of the puzzle. Sold individually — you’ll need two to complete the job — and don’t forget to add the matching bearing sleeve for best results!
Sold individually - requires two (2) per Bronco. Also fits 57-73 Ford Trucks.
Upper or Lower Steering Column Bearing | 66–73 Bronco, 57-73 Ford Truck
Keep your factory steering column turning smooth and tight with this OEM-fitment Steering Column Bearing. Designed to fit both the upper and lower positions in your stock column, this high-quality replacement bearing restores proper function and feel to your classic Ford truck or early Bronco’s steering shaft.
Over time, original bearings wear out, leading to play in the column and sloppy steering feel. Replacing both upper and lower bearings ensures smooth, reliable operation and helps maintain the factory driving experience you expect from your classic truck or Bronco.
Sold individually — most vehicles require two (one upper, one lower) - see chart for details.
Don’t forget to grab the matching column bearing sleeve for a complete rebuild!
-
OEM-Quality Replacement: Direct-fit for 1966–73 Ford Bronco & 1957-73 Ford Truck factory steering columns. See chart.
-
Restores Smooth Operation: Eliminates play in the steering shaft for improved feel and control.
-
Fits Upper & Lower Positions: Same bearing used at both ends of the column.
- Don’t Forget the Sleeve: Pair with the matching column bearing sleeve for proper installation.
Restore tight, smooth steering! OEM-fit bearing for upper or lower column, fits 66–73 Ford Bronco & 57-73 Ford Truck. Sold each, grab two for a full refresh!
| Model | Year(s) of Fitment | Steering Column Position Used | Vehicle Drive Configuration |
|---|---|---|---|
| F-100 (2WD) | 1957–1973 | Upper & Lower | 2WD |
| F-100 (4WD) | 1959–1965 | Lower only | 4WD |
| F-100 (4WD) | 1959–1972 | Upper only | 4WD |
| F-150 (2WD) | 1978–1979 | Upper & Lower* | 2WD |
| F-250 (2WD) | 1957–1973 | Upper & Lower | 2WD |
| F-250 (4WD) | 1959–1966 | Lower only | 4WD |
| F-250 (4WD) | 1959–1972 | Upper only | 4WD |
| F-350 (2WD) | 1957–1973 | Upper & Lower | 2WD |
| Bronco (Manual Steering) | 1966–1973 | Upper & Lower | 4WD |
| Bronco (Power Steering) | 1972–1973 | Upper only | 4WD |
*Note: For 1978–1979 trucks, this applies only to models with manual transmissions and column-mounted shifters (3-on-the-tree). Floor-shift and later steering columns use a different component.
**Note: All 1966–1977 Broncos were 4WD. 1978–1979 Broncos used a different steering column design and do not use this bearing.
California residents: Proposition 65 Warning
Questions & Answers
PRODUCT REVIEWS
Shop popular categories
4,5 stars