Turn Signal Switch, 66-73 Bronco SKU: 2858

Early Bronco Turn Signal Switch Replacement

Replace your 66-73 Ford Bronco turn signal switch with our OE-quality replacement. This turn signal switch works for all 66-73 Ford Broncos with factory steering column (manual transmission and automatic transmission). The turn signal switch has wiring not only for the front and rear turn signals, but it also has wiring for the horn, emergency flasher and the stop light switch. So if you are having trouble with any of these components, a new turn signal switch in your early Bronco may be the answer.

How to replace the early Bronco turn signal switch

Many early Bronco owners are too intimidated to replace the turn signal switch. There's no shame in taking the Bronco to a certified shop to have your new turn signal switch installed, but if you want to do it yourself we have some guidance to help you out. Once you understand the process, it's really not all that intimidating of a job.

The first key to replacing your 66-73 Ford Bronco turn signal switch is to ensure you know where all the wires go when you plug the new one in. Our 66-73 Bronco turn signal switches should match the wire colors on your stock harness if you have a 66-70 Ford Bronco. Wire colors on 71-73 Broncos may vary from your existing switch. Prior to removing your old turn signal switch, make note of the pattern in which they are wired to the body harness. Just compare the wire locations of your new turn signal switch with your old switch and you will know which colors have changed. This handy wiring chart may be helpful for wiring your new 66-73 Bronco turn signal switch.

Instructional Video: How to Remove the Turn Signal Switch from an Early Bronco

This video is a great resource as Jim Creel from Wild Horses 4x4 shows you how to remove the turn signal switch from your factory early Bronco steering column. The column in this video is a 1976 Ford Bronco column, but the steps are basically the same.

Instructional Video: How to Install a New Early Bronco Turn Signal Switch

Part two of Jim Creel's shift collar repair video shows you how to reinstall your turn signal switch in the early Bronco. Again, this is a 76 Bronco, but the steps are very similar.

|