Aluminum Shrouded High Output Radiator Fan, 18-3/4 x 17-5/8 x 3 SKU: 5044
Aluminum Shrouded High Output Radiator Fan, 18-3/4 x 17-5/8 x 3
Product Overview:
Aluminum Shrouded High Output Radiator Fan Dimensions 18-3/4" x 17-5/8" x 3" Deep This uses a 17" High Output Radiator Fan encased in a aluminum shroud
Designed to be used as a primary fan, replacing your stock mechanical fan, this unit features a dual speed motor that can move either 2400CFM (high speed) or 1800CFM (low speed) with a 24 or 18 amp draw respectively. Mounts as either as a pusher or puller fan without having to reverse the blade or rewire the motor. Requires a mere 3 1/4 inches of clearance. Features curved blades for quiet operation.
Important Note: While this fan can be mounted as a pusher, there is not enough vertical clearance within the Bronco core support for it to bolt up in front of the radiator. Please be sure to have at least 3 1/2 inches of clearance between the back of the radiator and pulleys, or anything else it might hit, to allow for body flex and engine movement, otherwise contact may occur.
Full description
Designed to be used as a primary fan, replacing your stock mechanical fan, this unit features a dual speed motor that can move either 2400CFM (high speed) or 1800CFM (low speed) with a 24 or 18 amp draw respectively. Mounts as either as a pusher or puller fan without having to reverse the blade or rewire the motor. Requires a mere 3 1/4 inches of clearance. Features curved blades for quiet operation.
Important Note: While this fan can be mounted as a pusher, there is not enough vertical clearance within the Bronco core support for it to bolt up in front of the radiator. Please be sure to have at least 3 1/2 inches of clearance between the back of the radiator and pulleys, or anything else it might hit, to allow for body flex and engine movement, otherwise contact may occur.
Designed to be used as a primary fan, replacing your stock mechanical fan, this unit features a dual speed motor that can move either 2400CFM (high speed) or 1800CFM (low speed) with a 24 or 18 amp draw respectively. Mounts as either as a pusher or puller fan without having to reverse the blade or rewire the motor. Requires a mere 3 1/4 inches of clearance. Features curved blades for quiet operation.
Important Note: While this fan can be mounted as a pusher, there is not enough vertical clearance within the Bronco core support for it to bolt up in front of the radiator. Please be sure to have at least 3 1/2 inches of clearance between the back of the radiator and pulleys, or anything else it might hit, to allow for body flex and engine movement, otherwise contact may occur.