Pulley Technical FAQ - WILD HORSES

Pump Pulley Tech

Item #: pulley
Technical information about pulleys and installation.


Pump Pulley Tech
All of WILD HORSES's Delphi pumps use a .750 shaft with a press fit pulley. The stock Bronco Power Steering shaft is approximately .690 so the pulleys are not interchangeable. If you are going to be removing and installing pump pulleys, we recommend one of our pump & alternator remover & installer tools.

Serpentine Pulley Tech
The serpentine pulleys come uninstalled. You will need to mount the pump to the bracket before you can install the serpentine pulley. One of our pulley remover & installer tools will be needed.

Power Steering Fluid Tech
For the best possible performance, WH recommends using power steering fluid (not ATF) in all of our steering components.

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.