WH Frame Mounted High Pressure EFI Fuel Delivery Kit

Item #: 9789
Kit includes Stainless Hose, High pressure EFI fuel pump, Pressure Gauge, Fittings, Clamps, and Filters.
Price:

Description

We have put together a very complete EFI fuel delivery kit. First we provide 16 feet of our stainless steel braided high pressure hyperflex hose, which you can cut as needed. Run the hose from your fuel pick up on your tank into the included pre-filter. From there into our frame mounted High pressure fuel pump. After the pump and before the throttle body EFI unit we put the 10 micron post-filter. We have also put into this system a 0-100 PSI fuel pressure gauge so you can monitor the pressure at the throttle body. Clamps and a number of fittings are also included. This kit works with all types of EFI systems from the stock Ford 5.0 Windsor EFI to all the throttle body EFI like Holley Sniper, FiTech and MSD.

This kit is intended for use with 66-77 Ford Broncos rear fuel tank.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
WH Frame Mounted High Pressure EFI Fuel Delivery Kit
Item #: 9789

Installation

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.