Thermostat Housing

Perfect fit. Nice casting, took paint well.

This housing will provide the extra port I need for the temperature sending unit since the intact water jacket port will have to be utilized for a short 90 degree heater hose fitting and the other water jacket port is being used for my fuel injection computer temperature monitoring sending unit. I had to trim off approximately 1/4 inch from the housing in order for it to fit since it would not clear my timing cover. A vintage air front runner system.

Fit perfect. Aluminum polish finish was a little bit shiny for the Edelbrock performer intake, but a quick hit with the sand blaster made it match up nicely against the aluminum intake. Now it's perfect...for me. WH rules.

Needed housing with extra port for water temp sensor, worked perfectly for my application and shipping was fast.

Outstanding quality , ship times and service! All parts ordered were at or above OEM quality. We will continue to utilize your company for any of our Bronco needs.

Replaced my thermostat housing when I did my water pump. This housing is a perfect fit to replace the old original.

Perfect, better than stock!

Great product. Allowed capability to add another water temp sensor.

The housing looks great with the rest of the aluminum on the motor. Greatest part is it has an addition port for collant temp sensing. or my set up i needed a total of three ports and this gave me the third one.