Reid Racing Chevy 10-Bolt Flat Top Knuckle Stock Replacement Right - WILD HORSES Off-Road Parts

Reid Racing Chevy 10-Bolt Flat Top Knuckle Stock Replacement Right

Item #: RRC10002R
Price:

Description

  • Only available as a right, passenger-side knuckle
  • Identical to our regular Chevy Dana 44 & 10-BOLT passenger-side knuckles, but without orange powdercoating
  • Ideal for crossover steering applications where the OEM non-powdercoated driver's-side knuckle is retained
  • Only available for the passenger side
  • Chevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy half-ton and 3/4-ton front ends
  • Cast from high strength ductile iron
  • Machined with a "bottom up" taper to match OEM Chevy 10-Bolt tie rod location
  • Beefed up with extra material and ribbing
  • Flat tops machined and drilled for high steer arms
  • 4th bolt hole for high steer arms increases clamping force and sheer strength
  • 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
  • Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
  • Tapered tie rod holes accept factory tie rod ends
  • Tie rod holes can be drilled to accept 3/4" heim ends
  • Interchangeable with all factory and aftermarket Dana 44 and 10-Bolt components
  • Fully machined and ready for installation
  • Machined to clear CTM u-joints without removing the grease fittings

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
Reid Racing Chevy 10-Bolt Flat Top Knuckle Stock Replacement Right
Item #: RRC10002R

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.