Buy Rebuilt F100 Power Steering Box - Early Ford Bronco Parts

Rebuilt F100 Power Steering Box



This Rebuilt F100 Power Steering Box is from a mid 70's 2WD F100-350.
  • If you are using the inverted Y type tie rod and drag link, which was stock on 76-77 Broncos, you will need to convert to the T style tie rod #2403 and adjustable drag link #2195. The 76-77 Y type linkage and its accompanying pitman arm are not compatible with this system. See the tie rod and drag link page for identification.
  • Use the stock pitman arm from a 66 1/2-75 Bronco (you may already have this). Drop pitman arms will set the drag link to low and should not be used with this system.
  • Minimum 2" suspension lift is required to use this system.
  • A track bar drop bracket will be necessary for proper alignment of drag link and track bar. You will want to use the drop bracket even if you have an adjustable trac-bar and even if you have only a 2" suspension lift.
  • If you want to piece the system together, our 2WD Frame Box Bracket (Part #2143) will save you a lot of time. Our box bracket is a one piece double gusseted design. You will not find a better one anywhere!

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Rebuilt F100 Power Steering Box
Item #: 2130



1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.