1980-93 4WD Ford Automatic w/Overdrive AOD to Dana20 Adapter
This new adapter will work with 4WD Ford AOD transmissions which should have a 31 spline output shaft.
This kit consists of a new aluminum housing, spud shaft, adapter plate, cross member sleeves, bearing retainer, bearing, snap ring, hardware, seal and gaskets. The overall setup will be about 1 1/2" longer than stock. Driveshaft mods are necessary. T-shift Dana 20 will be the easiest to use with only minor modifications. Installation with a J-shift Dana 20 requires a twin stick transfercase shifter.
™ Dana is a trademark of Dana Limited.
If the Dana logo is not shown, these parts
are not manufactured or authorized by Dana.
|WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.|