Family Cage w/ 6-Point Soft Top Support Kit 78-79 Unwelded - WILD HORSES Full Size Bronco Roll Bars

Family Cage w/6 Point Soft Top Support Kit 78-79 (Unwelded)

Item #: 794240
Family Cage with 6-Point Soft Top Support Kit for 78-79 Bronco (Unwelded)

NOTE We must calculate shipping for this item manually. We will call or email you for your approval prior to shipping. For expedited service, please call our customer service hotline (209) 400-7200. Your order WILL NOT SHIP until we receive your confirmation.
Price:

Description

This Family Cage Interior Tube Kit with 6-Point Soft Top Support Kit is made for the 78-79 Bronco and comes unwelded. These kits will fit every builders need. This Interior Bar Kit is formed from 2" x .120 wall ERW round tube, with 3/16 thick formed floor plates that are drilled and bent for each application. The kit is designed for easy fitment.

The unwelded kit can be tacked welded in place and removed from the Bronco in two parts, then fully welded and reinstalled into the Bronco in 2 parts. Then one joint on each side just behind the cab can be finish welded to cut down on in-the-truck welding.

The kit will come with the rear section from the 'B' post back fully cut and coped so no fitment work is needed.

The front part of the kit will need to be cut and coped depending on your application and dash layout floor bolts will not be included due to the wide application ranges.

WELDING IS REQUIRED ! This kit can be easily installed with an angle grinder, sawsall, and a welder.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
Family Cage w/6 Point Soft Top Support Kit 78-79 (Unwelded)
Item #: 794240

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.