Buy Extreme Duty Rear Axle Set 66-75 Sm Bearing 10in Drum

Extreme Duty Axles 66-75 Sm Bearing 10in Drum 31/35 Spline

Item #: 8600
Completely assembled and ready to install.
Our Price:

Description

Ready to install, our axles come with studs, bearings and retainers pressed in completely assembled. Just pull them out of the box and install.

Our Extreme Duty Rear Axle Set for the 1966-75 Bronco, Sm Bearing, 10" x 2 1/2" brake drum features:
* 31 or 35 spline
* Ready to install
* 1541-H alloy

35 spline sets are special order only and non-returnable.

Small bearing axles are not available with tapered-roller bearing. We use a conversion bearing which allows us to use 31 spline in the small bearing housing.

In the long run you will be much better off swapping to a large bearing housing and brakes now. If you choose to go with these 31/35 spline small bearing axles you can swap out the bearings to the large tapered roller bearings later as long as you upgrade your housing and brakes.

You will need to remove your existing axle seals from your housing ends. The conversion bearing are sealed and have a outer o-ring seal for the housing but we still recommend you purchase the additional housing seals seen below. Part #8632.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
Extreme Duty Axles 66-75 Sm Bearing 10in Drum 31/35 Spline
Item #: 8600

Product Reviews

Write a review

mr
May 16, 2017  |  By Kevin Meyers
Review star icon Review star icon Review star icon Review star icon Review star icon
First user on larger axles so am hoping for the best on my visit to OCBR this year.

31 Spline small bearing
Jun 3, 2015  |  By cjdaytona
Review star icon Review star icon Review star icon Review star icon Review star icon
Excellent axles for a small bearing 9".

71BRONCO71
Jun 1, 2011  |  By 71BRONCO71
Review star icon Review star icon Review star icon Review star icon Review star icon
When I upgraded from the stock 28 spline carrier to an ARB 31 spline carrier, I purchased these from WH. I have a small bearing axle which uses the "conversion bearing" instead of the tapered-roller. The Small bearing conversion bearing uses an O-ring which eliminates the need for an outer seal. I've had 2 abusive wheeling seasons on these and they haven't given me a problem yet.

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.