IDIDIT 1170855051 Tilt Column Direct Fit 76-77 Black Floor Shift Bronco FREE SHIPPING

IDIDIT Tilt Column Direct Fit 76-77 Black Floor Shift

Item #: 2517W
This IDIDIT Steering Column will be a "Direct Fit" (2.25" OD) just like your original factory column. It comes with a black finish and will work with any floor shifter. Made in the USA

This item will receive FREE SHIPPING to anywhere in the 48 contiguous states. The shipping charge for this item will have already been deducted from the shipping charge shown in checkout.
Customers outside of the 48 contiguous states will be emailed the shipping charges for approval prior to shipping.
Price:

Description

Made in the USA

WH has worked with IDIDIT to bring you "Direct Fit" steering columns. This column will replace your bone stock 76-77 column with zero modifications. It's 2.25" OD just like your factory column. Bolt your stock steering wheel on, plug in your stock wiring, bolt the column into the stock location using the stock hardware, and hook up your stock lower steering shaft. Old column out new tilt column in, it's that simple! This column is painted black (chrome and unpainted also available) This column is for use with any floor shifter.

BODY LIFT NOTE: If you have or are planning on a body lift, do not install the rag joint or rag joint flange. Instead, have us build you a #2161 Custom Lower Steering Shaft.

Watch the Video!

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
IDIDIT Tilt Column Direct Fit 76-77 Black Floor Shift
Item #: 2517W

Videos

Installation Part One
Installation Part Two

Product Reviews

Write a review

IDIDIT!
Oct 12, 2011  |  By blubuckaroo
Review star icon Review star icon Review star icon Review star icon Review star icon
I was in the process of replacing my C4 with a NV3550 transmission. I was going to have to replace the shift collar on the old steering column with a smooth one without the shifter. What an opportunity. I bought this IDIDIT Direct Fit tilt steering column in black powder coat. What a pretty piece! It fit perfectly. I decided to use the origonal Ford electrical connector and the wire lugs on the IDIDIT column snapped right in! There is a set of installation vidos on the Wild Horses site but if you can remove the old one, you can put the new one in. And for the price, you get everything new!

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.