Buy Black Tilt Steering Column - Column Shift with mount kit - Bronco

Black Tilt Column - Column Shift with mount kit 2 1/4 inch OD

Price:

Description

Black Tilt Steering Column - A/T Column Shift with mount kit. This is the column that comes with our 2895NET tilt column kit. These are made in the USA for WH by IDIDIT. We spec these out to be easily adaptable to the 66-77 Bronco. Our columns bolt into the factory holes with our built in mount bracket. We use a 1"DD shaft on the engine compartment side for ease of adapting a lower steering shaft (WH#2161). This column has a 2 1/4" OD keep that in mind if you are ordering a column cover (WH#2903).

NOTE these columns are GM style and will not fit the factory Ford steering wheels. Use an adapter like our WH#2932 or equivalent and the appropriate steering wheel.

THIS IS NOT EVERYTHING YOU NEED! This is a GM based column designed to bolt up into the under dash mounting location on your 66-77 Ford Bronco. It's best to look at buying the complete tilt steering column kits we offer because you will get everything you need, from the steering wheel down to the yoke that attaches to your steering box. Also be aware the GM based columns will not accept the stock Bronco steering wheels and you must use an aftermarket steering wheel and adapter.

We also offer Ford based direct fit columns for 74-77 Broncos. Don't have a 74-77 then it's best to look at the complete kits. Check here if that is more what you are looking for. COLUMN SHIFT COLUMN KITS

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
Black Tilt Column - Column Shift with mount kit 2 1/4 inch OD
Item #: 2941 BLACK

Q&A

Close

1045 S. Cherokee Lane | Lodi, CA 95240 | (209) 400-7200

HOURS: 8:30 - 5:00 (PST or PDT), Monday thru Friday
© 1995-2019 Wild Horses Inc.
Your source for 1966 - 1979 early & full size Ford Bronco Parts
and Classic Ford Bronco 4X4 Accessories
All Rights Reserved.