HD Front Driveshaft, 66-77 Bronco - Made in USA SKU: 8572

Upgrade your early Bronco with our heavy duty custom-built front driveshaft. Assembled with U-joints & CV joint, our driveshafts come balanced and ready to install. These drivelines are offered in two different running lengths to fit stock or lifted Broncos. Please select your required running length for best fitment. Available in 23.5 or 24.5 inch running lengths measured from center u-joint to center u-joint on the transfer case and pinion yokes.

Wild Horses Heavy Duty Custom Front Driveshaft

• Serviceable 1310 series u-joints with grease fitting in the bearing cap for easy servicing (most others do not.)
• Custom forged slip yokes approximately twice the strength of OE.
• Solid plug for keeping contaminates out and for correct grease flow.
• 2" DOM tube nearly doubles the yield & tensile strength compared to CREW (cold rolled electric welded) tube.
• All CV components are manufactured by Spicer, Neapco, or one of their affiliated companies
• All components selected to achieve maximum flexibility without compromising strength.
• Service tool for greasing the center pivot of the CV assembly is Included with every drive shaft purchase

These drive lines are made to fit Dana Spicer 1310 series yokes found on most early Broncos. If you have a Cleveland style yoke on your transfer case, you will need to replace it with a #8596 Transfer Case Yoke. Please refer to the measurement instructions and other considerations on the Driveshaft Category page