6 Point Soft Top Support Kit for 78-79 Full Size Bronco (unwelded).
This kit will fit every builders need. This Interior Bar Kit is formed from 2" x .120 wall ERW round tube, with 3/16" thick formed floor plates that are drilled and bent for each
The kit is designed for easy fitment. The unwelded kit can be tack welded in place and then removed from the Bronco in two parts. You can then finish the welding on each part and reinstall them into the Bronco leaving only one joint on each side just behind the cab to be finish welded in the truck.
The unwelded kits will come with the rear section from the 'B' post back fully cut and coped so no fitment work is needed. The front part of the kit will need to be cut and coped depending on your application and dash layout. Floor bolts will not be included due to the wide application ranges.
WELDING IS REQUIRED ! These kits can be easily installed with an angle grinder, sawsall, and a welder.
NOTE: This is a custom built part and is not made until ordered. Please allow a MINIMUM of 6-8 weeks for the item to be shipped. All orders must be prepaid and are not refundable after shipping.