GOT QUESTIONS?
|
209 943-0991
|
HOURS: 8:30-5:00 PST
640 N El Dorado St.
Stockton, CA 95202
|
WE HAVE ANSWERS
Huge inventory of 1966-1979 Ford Bronco and other off-road vehicle parts. Great prices and unmatched service from experienced Bronco builders.
|
|
Please LogIn or Register
FRONT END PARTS FOR DANA 44
66-77 Broncos came with the Dana 30 (66-71 1/2) and the Dana 44 (71 1/2-77). In 1976, Ford equipped the Dana 44 with disc brakes. The easiest way to identify which front end you have is to look at the steering knuckles. The Dana 30 uses king pins which are held in with four bolts on the top and bottom. The Dana 44 uses ball joints which are held in with large nuts (see illustrations below).
Dana 44 Front End Parts (71 1/2-77)
Note: All of the parts in this illustration will not apply to all years. Identify your front end and then check the part description for proper application.
Spindles
There are 3 different spindles that were used from 66-77. All Bronco Dana 30's and 71-72 1/2 Dana 44's use a spindle with the spindle/outer axle seal pressed into the back of it. These have 6 bolt holes. The 72 1/2-75's do not have the spindle/outer axle seal pressed into the back. It is located on the outer axle seal flange which is pressed onto the outer axle itself. These also have 6 bolt holes. The 76-77 disc brake spindle is easily identified by its 5 bolt holes. All new spindles come with spindle bearings.
Click here for a printable version
|
ARB Bronco Differential Cover
Item #: 8737
High tensile, solid nodular iron differential cover. Ideal for competition rock crawling or use on extreme off road rigs...
" [ read more ]
|
PRICES START AT: $187.80
Price may vary based upon
your option selection.
SEE OPTIONS HERE
|
|
Spindle 72 1/2-75 (New)
Item #: 8909
The 72 1/2-75 new spindles do not have the spindle/outer axle seal pressed into the back. It is located on the outer axl...
" [ read more ]
|
Here are some other products you may be interested in
|
Visa & Mastercard