SHOPPING CART
GOT QUESTIONS?
|
WE'RE OPEN
|
|
|
CALL 209 943-0991
|
|
HOURS: 8:30-5:00 PST
|
.
|
|
Please LogIn or Register
PERFORMANCE IGNITION
WH Pertronix Performance Kits
Here's a great way to save some bucks and increase your ignition performance at the same time. Each kit includes an Ignitor, Flame Thrower coil and Flames Thrower wires.
Click here for a printable version
|
Pertronix II Performance Kit
|
Item #: 8086
The Pertronix II Performance Kit includes an Ignitor, Flame-Thrower II Coil and Flame-Thrower Wires. It comes with either the 45,000 or the 60,000 Volt Coil.
Both offer these benefits.
- Maximizes energy and reliability over the full
RPM range.
- Enables larger plug gaps for greater fuel
efficiency and more power.
- Delivers more spark energy and voltage.
45,000 Volt Coil
The Flame-Thrower II coil provides high performance by cranking it up a notch to 45,000 volts.
60,000 Volt Coil
Our new HV (high voltage) E-Core design yields an incredible 60,000 volts and operates with no degradation throughout temperature ranges that surpass military specifications. The special heat sink design made from aircraft 6063 T5 aluminum efficiently transfers heat optimizing energy output for street/strip and off road applications. The housing is black anodized for increased corrosion resistance. Coils are vacuum potted resulting in better reliability and longer life.
Brass primary terminals provide greater current conductivity and allow direct mounting without special connectors or harnesses. Standard thread connections and mounting hardware is provided with each coil. The high tension male terminal is precision machined to ensure a snug fit for the coil wire. The heat sink extrusion is designed for ease of installation and allows alternate routing of wires.
Other Shopping Features
|
Prices start at: $179.99
Various Options Available
|
|
Pertronix Billet Distributor
|
Item #: 6103W
Designed to provide maximum ignition performance and easy installation at a price you can afford. Now you can upgrade your outdated points or stock electronic distributor with a performance-proven distributor that features the patented Ignitor 2 electronic ignition module and a CNC machined 6061 T-6 polished billet housing and deck. The Ignitor 2 module uses Hall Effect integrated circuits triggered by samarium cobalt magnets, located in a magnet sleeve, mounted on the distributor shaft.
A powerful micro controller with adaptive dwell algorithms allow the Ignitor 2 module to adjust dwell angle to maintain peak energy throughout the entire RPM range, increasing both high and low RPM performance. By adjusting spark timing over the entire RPM range, our module compensates for inherent electronic delay resulting in more stable timing. Ignition energy is also sustained with less heat buildup in the coil and module because peak current level is reached just prior to spark.
Our Ignitor 2 electronics are compatible with any inductive ignition system coil, but high RPM performance can be improved when used with our low resistance (0.6 ohm) Flame Thrower 2 coil. If you're using a multi-spark CD ignition box, our electronics are compatible as a trigger.
Other Shopping Features
SPECIAL OF THE MONTH
|
Prices start at: $199.99
Various Options Available
|
|
Pertronix Ignitor
|
Item #: 8080
This is absolutely the best ignition upgrade you can do for under one hundred dollars. We installed our first one years ago on our 73 Baja, and it's worked flawlessly ever since. Lets face it, points stink! You can install the Ignitor in fifteen minutes. Simply remove your points and condenser and put the ignitor in its place.
- A solid state electronic ignition system. "Never change points again!"
- Test results show the Ignitor delivers twice the voltage to the spark plugs, increasing horse power, fuel economy and plug life.
- Fits entirely inside the distributor. No "black box" to clutter the engine compartment.
- Stable timing...no need for any adjustments.
"...the ignitor is a simple and cost effective way to improve performance while increasing economy and dependability"-OFF-ROAD
Other Shopping Features
|
Prices start at: $74.99
Various Options Available
|
|
Pertronix Ignitor II
|
Item #: 8081
ELECTRONIC IGNITION The Pertronix Ignitor II takes ignition performance a step further by adding a powerful new micro controller. This controls the dwell period, for the best possible spark over the entire RPM range. Ignitor II offers enhanced performance levels only found in more expensive "box type" ignition systems. Think of it as an ignitor with brains.
Other Shopping Features
|
|
Flame Thrower Coil Chrome
|
Item #: 8082
Complete your ignition upgrade with a high performance coil! The Flame-Thrower is a 40,000 volt coil for use with the original Ignitor. The Flame-Thrower II cranks it up a notch to 45,000 volts and is for use with the Ignitor II. Both offer these benefits.
- Maximizes energy and reliability over the full
RPM range.
- Enables larger plug gaps for greater fuel
efficiency and more power.
- Delivers more spark energy and voltage.
Other Shopping Features
|
|
Flame Thrower II Coil Chrome
|
Item #: 8083
Complete your ignition upgrade with a high performance coil! The Flame-Thrower is a 40,000 volt coil for use with the original Ignitor. The Flame-Thrower II cranks it up a notch to 45,000 volts and is for use with the Ignitor II. Both offer these benefits.
- Maximizes energy and reliability over the full
RPM range.
- Enables larger plug gaps for greater fuel
efficiency and more power.
- Delivers more spark energy and voltage.
Other Shopping Features
|
|
Flame Thrower 8.0 Wires Blue
|
Item #: 8084
The Flame-Thrower 8.0 Wires Blue have a low 500 ohm per foot resistance with two current paths. The primary path is the stainless steel alloy winding with the secondary path in the carbon impregnated fiberglass core. Our sets are universal and come with old and new style distributor cap boots so you can run the wires just how you want them.
Other Shopping Features
|
|
Spark Plug Boot Protectors
|
Item #: 8024
These Spark Plug Boot Protectors are a must if you are running headers. The heat that a header can put out is often capable of burning the plug boot. If this happens you will experience a lack of performance because the spark will want to arc from the boot to the header. These protectors will keep the boots from burning and allow the spark to get to the plug where it belongs.
Package of eight protectors comes in Black, Red, Blue or Silver
Other Shopping Features
|
Prices start at: $69.99
Various Options Available
|
|
HV 60,000 Volt Coil Flame-Thrower
|
Item #: 8087
Our new HV (high voltage) E-Core design yields an incredible 60,000 volts and operates with no degradation throughout temperature ranges that surpass military specifications. The special heat sink design made from aircraft 6063 T5 aluminum efficiently transfers heat optimizing energy output for street/strip and off road applications. The housing is black anodized for increased corrosion resistance. Coils are vacuum potted resulting in better reliability and longer life.
Brass primary terminals provide greater current conductivity and allow direct mounting without special connectors or harnesses. Standard thread connections and mounting hardware is provided with each coil. The high tension male terminal is precision machined to ensure a snug fit for the coil wire. The heat sink extrusion is designed for ease of installation and allows alternate routing of wires.
Other Shopping Features
|
|