SHOPPING CART
GOT QUESTIONS?
|
WE'RE OPEN
|
|
|
CALL 209 943-0991
|
|
HOURS: 8:30-5:00 PST
|
.
|
|
Please LogIn or Register
MORE ENGINE PARTS
More Engine Parts
Click here for a printable version
|
Cast 302 Engine Kit Indented Hex Bolts
|
Item #: 6-0994
Cast 302 Engine Kit Indented Hex Bolts. The engine kits provide you all the bolts for the distributor, fuel pump, oil pan, intake, thermostat housing, timing chain cover, water pump and valve covers. Please specify cast aluminum or stamped steel valve covers. These kits are for stock Bronco 289-302 with passenger side water pump inlet.
Other Shopping Features
|
|
Steel 302 Engine Kit Indented Hex Bolts
|
Item #: 6-0995
Steel 302 Engine Kit Indented Hex Bolts. The engine kits provide you all the bolts for the distributor, fuel pump, oil pan, intake, thermostat housing, timing chain cover, water pump and valve covers. Please specify cast aluminum or stamped steel valve covers. These kits are for stock Bronco 289-302 with pass side water pump inlet.
Other Shopping Features
|
|
Chrome Alternator Brackets
|
Item #: 6007
Chrome Alternator Brackets. These are just like the stock Bronco alternator brackets. They fit the Bronco timing chain cover and line up the alternator in the factory location. They can be used with the 289, 302 and 351W.
Other Shopping Features
|
|
Pro Street Harmonic Damper
|
Item #: 8058
Pro Street Harmonic Damper. These balancers feature a dual bolt pattern for use with a 3 or 4
bolt pulley in either the V or serpentine style. They come with the spacers, snap ring and adapter as shown. In addition, the counterweight is also removable. This is perfect for those that purchase one for their original 302 but later swap in a 5.0 and don't want to have to change the balancer and pulley. Just change the weight and you will be good to go. They also have timing marks for the three configurations Ford has used over the years. Each balancer includes a single counterweight, but they are also available separately.
Other Shopping Features
|
Prices start at: $130.99
Various Options Available
|
|
A/T Mean Green Starter
|
Item #: 6036
Automatic Transmission Mean Green Starter. The Mean Green gear reduction starter provides 100% more torque, it's 5 lbs lighter and allows for 200% more cranking power than stock starters. We have used these for years in WH rigs and have been very impressed. Being able to start your rig in gear on the trail has some serious advantages, like you don't have to burn up the clutch if you have to stop in the middle of a difficult spot. The Mean Green has a life expectancy of 300,000 miles and comes with a 2 year unconditional warranty.
Other Shopping Features
|
|
M/T Mean Green Starter
|
Item #: 6037
Manual Transmission Mean Green Starter. The Mean Green gear reduction starter provides 100% more torque, it's 5 lbs lighter and allows for 200% more cranking power than stock starters. We have used these for years in WH rigs and have been very impressed. Being able to start your rig in gear on the trail has some serious advantages, like you don't have to burn up the clutch if you have to stop in the middle of a difficult spot. The Mean Green has a life expectancy of 300,000 miles and comes with a 2 year unconditional warranty.
Other Shopping Features
|
|
Hi Torque Gear Reduction Starter
|
Item #: 6038
These brand new permanent magnet Gear Reduction Starters weigh about 50% less than your stock starter. They offer more starting power but require less cranking amps. It's smaller size provides better header clearance.
- 100% NEW
- High-performance direct fit for stock starters
- Field case assemblies are 100% tested on a computerized gaussmeter to measure magnet strength & position.
- Zinc plated field case, solenoid, C.E. cover & hardware
- Armatures are precision balanced & feature banded hairpins
- Commutators are stake-welded & polished for longer brush life
- Carbon brushes are welded - same as OE
Planetary gears feature needle bearings (rather than bushings)
- Solenoids feature late style S-terminal with threaded post
- All component parts are OE interchangeable
- Starter, drive & solenoid are endurance tested
These come with wiring and installation instructions. They also carry a 30 month warranty.
CLICK HERE for Installation Instructions
Other Shopping Features
|
Prices start at: $119.99
Various Options Available
|
|
Extreme Motor Mounts
|
Item #: 8036
Extreme Motor Mounts. These will help keep your motor and fan blade out of your radiator in extreme off-road situations. The extreme motor mounts were designed to withstand the riggers of Baja racing. They come complete with urethane bushings, unpainted.
Other Shopping Features
|
|